1157 and 1156 Light Bulb Comparison


1157 and 1156 Motorcycle Light Bulbs

There are several motorcycle tail light and brake light bulb types which are interchangeable.

Note that these are bulbs that have a low/high filament; i.e., one filament is “on” all the time as the running light, and the other filament comes on as the brake light.

If your motorcycle takes a 21/5W bulb for the brake/taillight combination, you will see that there are alternative bulbs that offer different — and possible better — levels of lighting.

The most interesting aspect of this is that some of these alternative bulbs are available in “long life” versions, which are designed to last longer for “heavy duty” use where vibration is anticipated, such as can be experienced on motorcycles.

Why should you use a different bulb?

Note that the “Diff (%)” column in the table below shows the difference in Watts between the low (running light) bulb power (as an indicator of brightness) and the brake light power. This is important because a greater difference between the running light and the brake light to following vehicles will help increase their awareness that you are coming to a stop.

1157 and 1156 Motorcycle Brake and Tail Light Bulb Brightness Comparison
Bulb Filament Volts Watts Diff (%) Amps CP Lumens Life (hrs)
Dimmest 2057 Low 14.0 6.86 74.5 0.49 2 25 5000
High 12.8 26.88 2.10 32 402 1200
1034 Low 14.0 8.26 64.2 0.59 3 N/A 5000
High 12.8 23.04 1.80 32 N/A 200
1157 Low 14.0 8.26 69.3 0.59 3 38 5000
High 12.8 26.88 2.10 32 402 1200
2397 Low 14.0 6.72 76.5 0.48 2 38 5000
High 12.8 28.54 2.23 40 503 400
Brightest 2357 Low 14.0 8.26 71.1 0.59 3 N/A 5000
High 12.8 28.54 2.23 40 N/A 400
For reference, here are the specifications for a 21/5W bulb:
21/5W Low 13.5 5.9 76.5 0.44 2.8 35 1000
High 13.5 25.1 1.86 35 440 250
CP = Candle Power. Lumens are a more accurate way of describing “brightness”. This data is from one manufacturer’s bulb specification guide; other bulbs may differ slightly, but they should be very close. The bulbs are listed in order from dimmest to brightest.

For example, if a motorcycle’s running light is 21 Watts (typical 1156), and the brake light is 25 Watts, the difference would be so minimal that following drivers might not notice when the brake lights engage.

This is why I’m a big believer in the rule “one task, one bulb”. The difference between zero output and, say, 25 Watts, using a single filament bulb, is much greater and will be more noticeable than that of a dual-filament. But, I supposed to save space (and money), motorcycle manufacturers seem stuck on the idea of having one bulb perform multiple tasks.

My feeling is that you should find a bulb that is a compromise between three things: brightness, greatest difference in brightness between the running light and the brake light, and longevity.

The 2397 does it for me as a replacement bulb for my Triumph Thunderbird Sport’s 21/5W for one reason: it offers the same differential as the 21/5W, but has at least 5 times the life expectancy. Also, the 2397’s are noticeably brighter than the 21/5W’s when the brake light filaments are lighted (the T-Bird takes two 2397 bulbs).

Note:  Since this article was first published, there have been advances in LED lighting technology. See the wBW articles on LED light replacement and LED brake lights – tail lights.

Note: For informational use only. All material and photographs are Copyright © webWorld International, LLC since 2000. All rights reserved. See the webBikeWorld® Site Info page. Product specifications, features and details may change or differ from our descriptions. Always check before purchasing. Read the Terms and Conditions!

Owner Comments and Feedback

Please send comments to [email protected].
Comments are ordered from most recent to oldest.
See details on submitting comments.

No Comment

Leave a reply

Your email address will not be published.