REV’IT! Seesoft Back Protector Review


REV’IT! Seesoft Level 2 Back Protector Insert

The REV’IT! Seesoft back protector insert is lightweight, flexible and comfortable.

It also exceeds the CE Level 2 standard (report) for back protectors.

The Seesoft back protector insert is relatively inexpensive.

So even though I’d argue that it should be included in the higher-end REV’IT! jackets, it’s still a reasonable buy.

The unique design is a combination of nitrile and polynorbornene in “memory foam” composition layers that are designed to separate and slide on impact to manage the forces.

The design also continues to protect during multiple impacts, which is important.

Ventilation holes through the layers allow air to circulate and this feature, combined with the flexibility of the material, adds comfort.

The Seesoft protector is also relatively thin and lightweight, which makes it even more remarkable that it meets the CE Level 2 standard.

And last — but not least — the REV’IT! Seesoft back protector insert is currently available in 3 different types, with 9 different sizes for a total of 27 to choose from.

Newer REV’IT! jackets have a Seesoft pocket in the back with a coding that tells you exactly which Seesoft protector will fit.

With that many shapes and sizes, you may find that one of the Seesoft back protector inserts will fit your non-REV’IT! jacket also.

Rev'it Seesoft Back Protector Flexibility
Rev'it Seesoft Back Protector Insert

 Where to Buy REV’IT! Seesoft Back Protector

Solving the Back Protector Mystery?

I’d venture to guess that a back protector is one of the least common items of safety gear used by street motorcyclists and scooterists, and that’s a shame, because a back protector can help protect against serious injuries.

But the combination of light weight, flexibility and shape of the Seesoft back protector might just change the perception of a back protector as a heavy, uncomfortable piece of cumbersome gear.

From the very beginning — 14 years ago this month, in fact — one of the primary objectives of webBikeWorld was to promote motorcycle riding safety.

That, I hope, has been obvious. This means publishing topics about training and safe riding; tips on wearing proper riding gear and information and reviews about products to improve visibility of the motorcycle and the rider in traffic.

Standardization of Safety Gear

Related to this, and something we have mentioned several times, is the concept of standardization for the sizes and shapes of certain types of safety gear.

For back protectors, the idea that we have promoted is that in the interest of motorcycle safety and protection, clothing manufacturers should develop and agree on a standard size and placement for back protector insert pockets in jackets and pants.

Imagine this: back protector manufacturers would agree with jacket manufacturers to make back protector inserts to standard shapes and sizes. If this happened, every jacket would fit a standard shaped protector of any brand.

The protector manufacturers could then concentrate on competing by making better (i.e., lighter, cooler, more comfortable and more protective) inserts.

Not only would this increase the number of motorcyclists who would be wearing higher-quality protection rather than the junk foam that comes in most clothing, the prices would be driven down due to the economies of scale.

This could be done a couple of ways; for example, you might not even need a dedicated protector insert pocket inside a jacket.

If the jacket had strips of “hook-and-loop” or Velcro, then the back protector inserts could be packaged inside their own cloth pockets with matching “hooks” or “loops” and simply placed inside the jacket by the owner.

In fact, this may be the least expensive way to standardize. Of course, the tailoring, shape and fit of the jackets might have to be modified slightly to accommodate the standard back protector inserts.

I’m sure the manufacturers would come up with some type of argument of why this would never work, but I don’t believe it. I think that standardizing on back protector shapes and sizes could be done very easily.

Maybe it wouldn’t work for a small percentage of jackets and pants, but since clothing sizes are standardized, there really isn’t any reason I can see why this wouldn’t work.

Sound good? Apparently, the only thing that’s holding it back is corporate ego, which demands that every jacket have a unique shape and size protector so that the manufacturer can sell you their particular flavor.

However, as smart webBikeWorld motorcyclists, there may be a way to game the current system.

How? Well, as an example, the REV’IT! Seesoft back protector inserts are made in 9 different shapes, with 26 different sizes spanning those shapes. You may be able to find one that fits your non-REV’IT! brand motorcycle jacket.

So this review isn’t just for REV’IT! jacket owners; anyone may benefit by learning more about the Seesoft protectors. Read on…

Rev'it Seesoft Back Protector Documentation
If your “CE Approved” product doesn’t come with this type of documentation, it’s not.

Back Protectors vs. Inserts

×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

Back protectors and back protector inserts for motorcycle jackets aren’t new; we have published many back protector reviews on webBikeWorld over the years. And for added protection, check out our airbag vest and jacket reviews.

The problem is that many motorcyclists still don’t incorporate a good quality back protector into their regular riding outfit.

I’m sure that one of the reasons for this is that the “strap on”, race-style back protectors are generally uncomfortable to wear on the street and they also have poor ventilation.

Also, it’s yet another piece of gear that you have to climb into before riding and to me, the least fun part about motorcycle riding is the ride preparation. Besides taking time, it kills the spontaneity on both ends of the ride.

This is where a back protector insert can help.

While perhaps not offering the same high levels of impact protection as a full race “strap on” back protector, surely something like a REV’IT! Seesoft back protector insert with a CE Level 2 rating is gobs better than the cheap foam pads that are provided with most jackets.

The magic is that once the protector insert is in the jacket, you never have to think about it again — it’s always there with you, as soon as you slide your arms into the jacket.

Rev'it Seesoft Back Protector Glue
The layers of the Seesoft back protector insert are assembled with a special type of glue.

REV’IT! Seesoft Back Protectors

I first described the blue-colored REV’IT! Seesoft back protectors in my REV’IT! 2013 Spring/Summer Clothing Preview.

REV’IT! designs and develops the Seesoft protectors in-hours to complement their race-orientedTryonic back protectors (report) (REV’IT! bought the Tryonic company in 2011).

Both Seesoft and Tryonic brands are currently in the process of becoming incorporated into the REV’IT! product line and my guess is that we’ll see more of these products in the coming months.

For example, the Seesoft hip protectors, which I first described in my REV’IT! 2013-2014 Fall/Winter Clothing Preview, use the same design and technology as the Seesoft back protectors, will go on sale starting in February of 2014.

The REV’IT! Seesoft protectors are designed to fit into REV’IT! jackets and pants, but you may also find that one of the shapes may just happen to fit into other brands too.

Seesoft Protector Sizes
REV’IT! Seesoft back protector insert shapes. Here’s a large 1539 pixel version.

 Where to Buy REV’IT! Seesoft Back Protector

REV’IT! Seesoft Back Protector Insert and the Level 2 Standard

The CE standard helps a consumer to differentiate between the quality and effectiveness of the various back protectors on the market.

The draft European standard (prEN 1621-2:2012) determines the minimum size of a protector and minimum shock absorption requirements.

The test is conducted by placing a back protector on a slightly arched anvil that is equipped with instruments for measuring impact forces. A striker weighing 5 kilograms (about 11 pounds) is dropped on the protector from a height of one meter.

The device measuring the force will only measure the force underneath the protector, effectively gauging the energy (known as the residual force) that makes it through the protection to the rider.

The lower the residual force, the more effective the protector and the safer the rider.

Level 1: After several test and multiple impacts, the residual force value must register no greater than 24 kN, and the average of all impacts must be below 18 kN. If it meets these criteria the protector is then qualified CE Level 1.

Level 2: This test is a more stringent safety standard that specifies12 kN for the maximum value of the registered force and 8 kN for the average value.

Seesoft Test Results: The average value of residual force with the Seesoft CE-level 2 back protectors is 5.6 kN, exceeding the Level 2 standard.

Seesoft Protector Types

What This Means for Motorcyclists

×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

The design of the Seesoft protectors make them very flexible and lightweight (the Type RV, size 05 protector shown here weighs 282 grams or 9.9 oz.) and the result is that they are easier to wear than many other types of protectors or “armor”.

The idea of having the multiple layers is that during a severe impact, the foam layers will shift relative to one another, resulting in impact dispersion over a larger effective surface area, reducing the impact to the rider’s body.

The Seesoft protectors are also multi-impact rated, which means that they are still functional after a crash.

The layers are semi-loosely bonded together with a special glue, so the protector should be periodically checked for wear and tear, especially after an impact.

I consider a protector as a “one-time use” piece of safety gear, like a helmet or jacket. If the gear is impacted, it’s done its job and it needs to be replaced.

It makes no sense to me to try and save a few bucks by re-using a helmet or even a back protector, because they can both be replaced at low cost. So why take the chance?

Rev'it Seesoft Back Protector in Poseidon Jacket
The REV’IT! Seesoft Type RV back protector insert, size 05 fits in the size large REV’IT! Poseidon GTX jacket (review).
Rev'it Seesoft Back Protector Inside
This side faces towards your back. Note ventilation holes.

 Where to Buy REV’IT! Seesoft Back Protector

Notes on Fitting a REV’IT! Seesoft Back Protector Insert

Although the Seesoft protector is relatively thin (see photos below), it does take up some room in the pocket of the REV’IT! jackets.

If your jacket is marginally tight-fitting across the back or chest, the Seesoft protector may take up enough room to make the jacket feel too tight.

For example, the REV’IT! Poseidon GTX jacket (review) we reviewed is a size large. It’s a fairly snug fit for me because I’m on the borderline of a large and XL.

With the insulating liner installed in the Poseidon GTX, I can fit maybe a single under layer or a turtleneck shirt but no more. Add the Seesoft protector and the jacket becomes too tight — I should have ordered an XL.

I think that in the near future, REV’IT! should consider revising the design of the jackets to assume that owners will fit a Seesoft protector.

This means either a redesign of the protector pocket or slightly more “give” in the tailoring of the jackets in the rear to accommodate the protector without affecting the size and fit.

UPDATE: REV’IT! said that all jackets produced since 2013 are fitted with the pocket shaped to fit the RV type insert, so one day when all older jackets are out we will have one back protector for all jackets.

In the meantime, if you’re considering buying a new REV’IT! jacket, I’d suggest trying it on for size first with a Seesoft protector installed to ensure the correct fit.

Let’s take a look at some of the REV’IT! Seesoft back protector insert features in the following photos:

Rev'it Seesoft Back Protector Layers
The layers of the REV’IT! Seesoft back protector insert.
Rev'it Seesoft Back Protector Thickness
The thickness of the Type RV, size 05 Seesoft protector with a Clearwater “Andie” flashlight (review) for scale.
Rev'it Seesoft Back Protector Compared to Original
Thin back pad that comes with REV’IT! jackets like the Poseidon GTX on the left. REV’IT! Seesoft protector on the right.
Rev'it Seesoft Back Protector Compared to Original
Standard foam pad supplied with the Poseidon GTX jacket and the REV’IT! Seesoft back protector insert.

Conclusion

×
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.

The REV’IT! Seesoft back protector is lightweight, comfortable and flexible. It is just about unnoticeable when fitted in a motorcycle jacket.

The most important benefit of using a back protector insert in your motorcycle jacket is that it’s always there.

You don’t have to remember to add another piece of gear by strapping on a (probably uncomfortable) race-style back protector.

Although the Seesoft protector may not provide the same levels of protection as a “strap on” type like the Forcefield Pro Sub 4 (review), which is currently the impact force reduction leader at less than 4 kN, it’s certainly better than the flimsy foam pads that come with most jackets.

I’d like to see REV’IT! tailor all of their jackets so that a Seesoft protector will fit without changing the size.

I also think a Seesoft protector should come with at least the higher-end REV’IT! jackets as standard fitment.

If you own a REV’IT! jacket, a Seesoft protector insert should be on your shopping list. They’re cheap enough at a list price of $49.99.

For non-REV’IT! jacket owners, you may find that one of the many different shapes and sizes of Seesoft protectors will fit.

And don’t forget to look for the Seesoft hip protectors for motorcycle pants also.

More webBikeWorld:

▪ All wBW All Product Reviews
wBW Review: REV’IT! Seesoft Back Protector Inserts
Manufacturer: REV’IT!
Colors: Blue and black.
Made In: Unknown
Sizes: 9 shapes & 26 sizes
Review Date: January 2014
Note: Item provided by a retailer, distributor or manufacturer with these Terms and Conditions.
Note: For informational use only. All material and photographs are Copyright © webWorld International, LLC since 2000. All rights reserved. See the webBikeWorld® Site Info page. Product specifications, features and details may change or differ from our descriptions. Always check before purchasing. Read the Terms and Conditions!

 Where to Buy REV’IT! Seesoft Back Protector

Owner  Comments and Feedback

Please send comments to [email protected].
Comments are ordered from most recent to oldest.
See details on submitting comments.

From “H.S.” (March 2014): “I’ve been using a Seesoft in my size Aerostich Roadcrafter (size 40) and Darien (medium) jackets.

Aerostich sells an adapter sleeve in order to use its “Transit” back pad (actually a re-branded SAS-TEC pad) in its other jackets; the Seesoft ST-12 pad fits right into the size Medium adapter sleeve like it was made to do so.”

Other WebBikeWorld Helmet Posts

 

No Comment

Leave a reply

Your email address will not be published.